Search results

I'm not sure how to fix the bass issue but the gain is probably working correctly. This circuit does not produce a lot of overdrive. If you want to get more gain out of it, I'd suggest keeping the volume low and hitting it with a boost :D It reacts well to boosts and breaks up nicely!

I second no clipping diodes :D

Hey sorry to open up this old thread! I was trying to figure out how to do this and came across your post! I ran into a problem where I snapped off the lever and threaded part and need to replace the switch. Problem is Im not sure how to disassemble/pry it apart it like you did these pictures...

Have been trying to fiddle around with the sounds from it and decided I want to fix the switch! Luckily I did find the rest of the switches so I do have a replacement. Turns out its not too much bass, just bass hump in the wrong freq. With the brightest setting (the one mine is stuck on) it...

Hey guys :D I just finished the King Nothing build and it sounds great! I've also built the Particle accelerator and the old two knob version of it before. I think the KN has a more pleasing grit than the old PA and the new PA isnt really meant to have that much gain. The mode switch is real...

I also have 510K lol never remembered to restock 470K. How would 510k vs 422k affect the king nothing circuit? Would I be right to assume the higher resistor value would produce less grit with more volume and less bass/low mids?

this is for king nothing, i believe the circuit also calls for 330k (which I have) but it also isnt on the doc

I was putting the resistors on the board and realized the build doc doesnt have the 470k resistors. I'm all out of those but I might have enough 422k and 51k to put in series in those spots. Would that be a bad idea considering the sensitivity of these circuits?

To me, turning up the sag makes the drive sound more compressed but also denser. I guess those kinda go hand in hand. When fully CCW it sounds like the clipping is happening more sparsely on mild settings. I agree with it shining as a stacked pedal. I like running it full CCW with mild gain (3...

I only have one 12ax7 but I got two 12at7s and a 12ay7. Is there a V1 V2 configuration that would get more grit out of the Bassdude with maybe less volume output?

squidward pedal hehehe

very interesting thanks for the detailed explanation! what would happen in a typical blues breaker?

And do transistors fit anywhere in this question? 😟

I just watched the most recent TPS video and them talking about diodes made me think: what do we hear clip first usually? I bet it's varies from circuit to circuit but i'm curious nonetheless! I tend to keep the gain on my pedals below 3 o'clock so this is very interesting to me.

This seems interesting! Having a power amp to use with the other sushibox pedals would be cool. You could have something like particle accelerator -> space heater -> (this thingy). It'd be like a little fender champ : D

Im waiting for my tayda order to come in tmr so i can make this thing mwahaah. I do have a question about the circuit. From my understanding its based off a showman preamp but what besides the tone stack makes it so? Otherwise its just the same as any other AB763 correct? Does it have to do with...

Any updates on this? Not trying to rush you :)

have u tried running it into an effects loop with one of the sushi box pedals 😏

Do you run it straight into a power amp? Cool stuff! I never heard of west tube amps ima go look into that : )

thank you!!