Search results

I received it yesterday…..its going to be a fun build but a long one…..need to order some parts.

Hello great community. What would be the wiring to add a jack input/red remote switch to an existing toggle switch? Yes, i want to do that on a pandora’s box like the kilt v2 ;). Thank you.

I had the same issue with a strymon ps.

Desoldering parts from a board is the last thing you want to do…..

I’d definately resolder many of the components. You should get every hole filed in both sides with the solder.

There goes my latest build. Pro-10 with Fight Club theme enclosure.

Since i put the argentum in the disappointment section (Other thread), i remember after reading this thread here that i had the same incapacity to bias one of the transistor to 9V. Must be the same one you guys talk about. Can there be enough difference from 10.something Volts to 9V for one of...

definitely not normal. i'd check with the grounding.....i see that the board is ground through the output jack. idk if it could be that but i always ground the board directly at the DC jack (along with the input jack). i usually let the output grounding through the enclosure (just scrape a...

Wouldn’t be surprised if there is a solder bridge somewhere……

Id grab one too

nice thank you!

Good. I only need to drill the enclosure before rocking this guy!!

Hi. Since it oscillates, i’d check the wiring of the input/output jacks. Its hard to see from the pictures but since the yellow wires seems to be used for the sleeve lug (ground), they should not be soldered to the input/output lugs of the switch (middle row). Black wires from the jacks (tip...