Search results

Not a bad idea. I think I am going to build another of the boards soon with a few changes. One of the cool things about using the crimped connectors is I can pull the board and replace it with another no soldering required. Just hard clipping like this.

What's funny is the "hiss" is only when playing and it seems to be there even when set to LED and with the gain down. It's a sound I haven't really heard in the other builds I have done. It's kind of like a distorted overtone for lack of a better term. I will see if I can try to capture it...

The distortion plus was the first pedal I successfully made. I used the PPCB board. This is my take on the distortion +. It isn’t exactly what I was hoping for but I’m thinking of it more like a prototype. I will probably play with changing pot tapers and I will also fix the pots that don’t...

When I first started working in Civil construction all state and federal jobs were metric. I could have worked happily in metric but other than 1 guy who was from the UK no one else could. So we labor intensively converted the plans and survey stakes to feet. After a few years it seems like...

Let’s not look past the fact that they have somehow engineered the impossible here and put both the DC and quarter inch jacks in the correct place on the back.

Well now I guess I need to wait until this comes out to order a new tuner for my board.

Plugged this in the other day and it didn’t have any volume. Guessing I got a dud on the electrolytic. Easy fix tho.

Not had a bunch of time to work on things lately but took a day off work and this is one of the things I got done. I actually like this pedal more than I would like to admit. With the additional volume I added I can set one side with no gain and high volume to tighten up the front of a...

Been a bit since I have posted life has been busy and I haven’t done much building. Not so much of a build but a repair and rescue. I have owned this wah since I was a teenager and at some point I poorly converted it to true bypass but it never really worked right. I don’t normally play...

Post some pictures of the board front and back. Include the wiring and connections.

lol I it’s not really valentines themed but it did feel motivated to finish it and post it today.

Here is the Whole Hearted V2. It is a dual LM386 based distortion pedal. The artwork is based on drawings my daughter used to do when she was little. The first version of this pedal was my first attempt at modding/designing a circuit. This is updated now that I know a bit more about pedals...

D310, I bought them with the board.

The LED https://www.taydaelectronics.com/leds/round-leds/10mm-leds/blue.html The holder https://www.taydaelectronics.com/10mm-led-bezel-holder-plastic.html I wasn’t sure the holder would work but it’s just low enough to fit under the board. It would be easy to trim if you had to.

Here is my build of the @PedalBuilder Harmonic Percolator. They helped me with the germaniums for this project as well as my Muffin Factory. The enclosure was designed by @steviejr92. It’s super sturdy and well made. It looks really nice. This pedal sounds great I have only played it into a...

I haven’t used an expression pedal with this nor am I that knowledge about what’s out there. These are the sections of the circuit where the expression pedals jump in. One is a C1M wired as a variable resistor and the other a B100K as a potentiometer. My guess is you would want something that...

Here is the new boards build up. I feel happy with the layout of these. I’m experimenting with the next version which might have some additional filtering and possibly an added trim/boost stage. I have a few projects I want to work through first. My plan is to build these out and give them...

I want to start by thanking @tcpoint for this board and a bunch of the harder to source parts to go with it. I think this pedal came out really well. It looks a lot different than my other build and had a lot of first in it for me. First SMD IC, VFE, soft touch relay switching, Skinny Wima...

I have been working on something somewhat similar to this as well. I would consider an 8 way rotary for the clipping and set it up with something like no clip, led-led,led-4148,led-bat41,4148-4148,4148-bat41,bat41-bat41, and maybe just lock out the last position with the washer. The build I am...

If you keep this up I might end up with a JLC order of just your boards. Awesome job again!