Search results

It's the lower right. Sorry, the "Swell", not the Dwell. The faux reverb. I tested voltages at the pins of the pot and am getting right around 3.3v on pin 3 for all of them and an even rise and fall when sweeping the pot up and down on the wiper. As soon as I begin to roll pot 6 up it sounds a...

Got mine all together using the rhythmic delay and all works... except the dwell pot. I get a harsh scratchy static noise if it's turned up at all. No noise if it's at zero. Maybe bad pot? I guess I should've measured them all before I put everything together.

I ordered some of the dress nuts. Did you have any issues with the nuts for the switches not being threaded all the way through? Oh, duh. Right as I hit "submit" the solution hit me. I guess I could have deleted the post, but then, why deprive all of you a laugh?

Also, not sure if you can see from the image, but the ones in my pedal are from Mouser and are supposed to be Texas Instruments, but that logo, kind of a curved "N" does not look like any TI logo I've ever seen.

I'm certain they convey some meaning to someone, but to me, it just tells me that they are different.

Better results with which ones? I bought ones from Mouser, because I remember seeing some posts around saying that there were lesser quality ones out there and I figured Mouser would have the better ones, but maybe not. I would have gotten them from Small Bear, but they didn't have them at the...

I thought that my troubleshooting on this pedal was over, but... It works sometimes, for a while. Sometimes it doesn’t. When it is working, if I turn the depth and sweep up toward max, it “ticks/thumps” with the LFO, until it quits working. When it doesn’t work, I basically get the dry signal...

That's what I was wondering. From what I was able to find on the internet, the Bluesberry version has 2 diodes (1n914), one between the noninverting input to the inverting input, and another one from ground to the inverting input of the op amp. There is a debate about whether this is accurate or...

Has anyone ever attempted a Double (Awful) Waffle? Wondering if the difference in the "Bluesberry" is just a different op amp (TL071 maybe) and how the switching might be done that disables the controls on the A side and only have a gain control feeding the A into the B side. Jumping P1 and P2...

By the way, what is the size limit on image uploads? Because it won't let me upload from my phone and that re-sized image is terrible.

I kind of got it working. If I have the trimpot pretty much maxed out or very near to it, I can get the gated fuzz up to about 65-70% of the fuzz pot before it quits any output. Is this normal?

Just finished assembling the Cheesemonger and it has no fuzz in pos. 4. I get dry signal with the fuzz pot rolled all the way down. Other positions seem more like a distortion pedal than a fuzz. Certainly nothing like the Big Cheese or the Cheese Ball. I'm wondering if the fuzz pot legs are...

I was testing out my Circulator that I finished today and was getting no wet signal at all. LED worked as expected, but clicking the footswitch, it was exactly the same as bypass, unless I flipped the PV toggle, which resulted in no signal at all. Took it apart, check, rechecked, reflowed...

I just finished building the D3lay and I noticed that the output is very faint even with volume maxed out no matter where the mix is. Not sure which version of the board it is. This is from my order - Pythagoras PCB (PCB080) x 1, D3lay EEPROM (6-3-2) x 1, Spin FV-1 IC (Pre-Soldered) (6-1-4S) x...

So, just finished this pedal. The bypass signal is really quiet compared to the effect sound. Not sure if it's supposed to be a huge boost when the pedal is on. Just to make sure, when wiring the input and output jacks, the wires from the footswitch go to the tip and the ones from the top of the...