Search results

Thank youuu

Hi. Does anybody have a Tayda Drill Template for the Akronym Bass Overdrive?

Follow this thread: Unison Stereo Mod Only two I things I did that weren’t in that thread were 1) instead of soldering into pin 1 on the back, or directly at all, I just jammed the lead into the 8-pin socket the same time as the tl072 without soldering at all. 2) used a 4pdt, instead of a 3pdt...

Meaning a 22k where the 33k should be, and the og 22k left out or jumpered?

This is awesome. Did you trace it yourself? Thank you so much

It just sounds different, other than just presence also, but I can’t describe it in words. Crisp? Idk

More pronounced. The schematic for the glove up top and the ocd have several differences. There’s so many different ocds though that it’s hard to know which it’s a clone of. I’ve had two gloves and they sounded indentical, and had a v2 ocd and it sounded different than them. I definitely prefer...

Thank youuuuuu I couldn’t find it anywhere 🥰

Does anyone have the schematic for the ehx glove? It’s a clone of the OCD, but there is a noticeable sound difference between the two. I’m not sure which version of the OCD the glove is a clone of, but I’m hoping someone has the schematic so I can build it with the ADHD board. A lot of the...

Thank youu. I definitely recommend it. I’m using it as an always on at the semi-beginning of guitar signal with parallel ODs out to two amps. It adds a thickness I may never be able to play without again 😂

Unison Double Tracker with the Stereo Mod in matte black. Sounds amazing, probably my favorite build to date. Used the pin 1 tl072 mod to make it stereo, except, I went through the front and jammed the lead of the cap into the socket the same time as the tl072. No soldering, works great. Used a...

Thank you from the future

So if I was using a guitar in drop-C or C-standard (have a few songs with that tuning) that low C is ~65hz, what would you recommend changing C1 and C4 to? Would any other changes help?

I might use it for a synth, I’ll leave at 1uf. Appreciate you!

Hey, I’m building a Pythagoras / Unison Double tracker at the moment. I went with 1uf film caps instead of the 1uf mlcc on the parts list. I got a shipment in from Tayda and I forgot to check the width of the caps, they are 5mm, rather than thinner like 2.5mm. So my question is, does anyone have...

I’m attempting to do a stereo bypass with a 4pdt so that it bypasses dry in both outputs. The outputs through the circuit are dry/wet-and-dry with a mix knob that can make it dry/fully-wet. I definitely consider that stereo. @Robert do you have a 4pdt stereo bypass breakout in the works by any...

Appreciate you

With this mod, are the outputs wet/dry or wet&dry/dry?

Appreciate both of you. I’m so bad at measurements on enclosures.

Thank youuuu so much