Search results

I can’t find a picture of the old version of the PCB I’m getting sound, but it’s not loud, no distortion/distortion knob does nothing I used an LF347 and a LM324. I read they should work, but maybe not in this circuit.

I finished the Aion Duellist and the Heavy Hand/Blues breaker side is super distorted, even with the gain all the way down. I checked over the hard clippers to make sue they weren’t engaged as well as checking other components. The Soloist side sounds good Not sure what’s going on Here are...

Built the Pedal. It works, but the phasing seems weak, even after numerous attempts at getting the bias to correct it. Is there a good place to start troubleshooting? The signal comes out clear and strong, just seems like the phasing could be stronger. Could that be the nature of the build...

Are the channel switching relays in Soldano, Bogner, Tone King amps latching relays? I can use my Carl Martin Octaswitch to switch channels In the above amps using a pair of triggers in the unit and I’m looking to build a relay loop box that I can also turn off and on with the the same...

I built an Aion DS-1 with lots of sockets for modifying and it currently sounds like an overloaded splatty Fuzz for some reason (no I did not do the Muff mod) I’ve gone over the solder joints, checked the part values and the voltages at a few key places. All check out. The next thing for me to...

I’ll just say I and so happy this build is finally working. It’s been about a two year battle of attempts to fix it, putting it away, then having another go, and so on…. As of yesterday the regular flanger mode seems to work as it should, but in matrix mode there is signal, but no effect. It...

I’ve gone over the pedal a bunch and I’m not sure what’s causing the oscillation. To be fair this Pedal is probably a little over my head, but I keep coming back to it to see if I can get it going. I did do the update with biasing resistor. A friend of my got it running really quietly, but...

I do know a few things about diodes and have experimented for years, but the is a lot I don’t know. I do know that forward voltage is probably the key spec in indicating how much clipping a circuit will have. I’ve used diodes with very low Fwd voltage that clipped a lot, but we’re very quite...

I want to build a relay loop switcher box that can be triggered by the two relay triggers on my Octaswitch III. I made a box using a BYOC relay module. The box works, but is not compatible with the Octaswitch triggers. If you could say which specific module would work and not just the type...

I just built some KOT/POTs with a 500kB drive pot instead of the 100kb. The higher value was taken from another variant called the British Ballbreaker. It seems like there is a concentration of gain bunched up at the end of the pot rotation. Would using a log, or reverse log help distribute the...