Search results

Hello, is there a Tayda drill template for the Mofeta Preamp?

Thanks, just wanted to confirm. Back to work!

Hey @MichaelW. When swapping the two LEDs with 2.2uF MLCCs, does their orientation matter?

Here are some photos, @Nostradoomus. I measured each resistor and capacitor before soldering. A couple of those solder points look dodgy but they've been reflowed. The pedal works, the J201s are biased to 6v with SAG set to 9v, but total amount of gain seems low. I'm thinking @johnk_10 is on to...

Can you elaborate on this? I know it's best practice to measure these things before installing but I don't have a tester.

Thanks for your message. From reading other Chop Shop threads, I made sure to set SAG fully clockwise and confirm that lug 1 was reading 9v, which it was, before biasing.

@Nostradoomus, will do when I get home! I thought I'd get a head start on the thread.

Hi all, I'm trying to troubleshoot a completed PedalPCB Chop Shop / Fairfield Circuitry Barbershop build. The build functions as intended everywhere except the DRIVE pot. I'm at a loss at what to check next. I read other Chop Shop build threads on here and everything seems to be addressed. I...

Can I ask which specific diodes you used for the three 9.1v?

Hello! I’m trying to put together a Tayda drill template for an Aion FX Refractor. I successfully input the drill coordinates for Side A based on their build doc. For Side B, Aion FX’s drill template does not list coordinates in the same way that allows me to transfer Side A into Tayda’s...

@jcpst, thank you!! @Nostradoomus, thanks for letting me know. I missed the news that Tayda is no longer stocking pre-drilled enclosures. Thanks for confirming that template as well. I duplicated the template and mirrored the position of the switch.

Hello, quick question! Tayda doesn’t offer a pre-drilled enclosure specifically for the Basstortr (3 knobs, 1 LED, 1 switch), but it looks most like this three knob pre-drilled option...

Hi everyone. I finished an Aion FX Maelstrom (Darkglass Vintage Microtubes) build and am having some trouble with it. When bypassed, the signal flows through the pedal correctly. When on, the LED works, along with all the controls (Volume, Blend, Tone, Drive and the Low and High toggle...

Is it correct to assume that looking at the second post, the leftmost effect is first in the signal chain, followed by the rightmost effect, before the signals exits the pedal?

It turns out my intelligence CAN hit a new low. (The parts are separate. The jack was incredibly tight, leading me to believe it was one unit.) I'll see myself out now...

Hi everyone, I ordered these Kobiconn DC jacks from Mouser (recommended by Aion Fx's parts spreadsheet). From the photo, I thought the black hex nut was tightened to the body of the jack at the time. Kobiconn DC jack 163-4302-E In person, the hex nut is actually fixed to the rest of the jack...

I'm in the middle of a Paragon build and asked this last week. I purchased these headers: https://www.taydaelectronics.com/40-pin-2-54-mm-single-row-pin-header-strip.html

Hi all, Can someone please confirm that I have the right part for the Paragon's 4-position DIP switch? I'm looking at this from Mouser: CUI Devices DS01C-254-L-04BE Thanks!

Solved! (Mods, can this be deleted?)

Right on. Thank you.