Search results

  1. C

    Six String Stinger - missing output and too dark

    Thanks, that's interesting. When I look at the manual, I also see Parts list and C12 is actually tagged as 22n, whereas on the board layout is tagged as 2n2.
  2. C

    Six String Stinger - missing output and too dark

    How do you find C11 R8 and R14 on the board?
  3. C

    Six String Stinger - missing output and too dark

    I also just finished building this pedal after buying the kit from musikding, and I have exactly the same problem. I'm basically playing with all pots maxed out in order to have enough output and not too dark. I'll try to swap C11 to 22n and R8 and R14 to 5k.
  4. C

    Correct orientation of JFET in Six String Stinger

    Oh, that explains it. I did post about the datasheet, which I did look at (see my comment #7) which suggested they were inverted. But I guess it was the *wrong* datasheet, because with the one you link to it all makes sense. Thanks folks!
  5. C

    Correct orientation of JFET in Six String Stinger

    what do you mean? i check the continuity between the transistors and the smd pins.
  6. C

    Correct orientation of JFET in Six String Stinger

    Curiously, https://forum.pedalpcb.com/threads/six-string-stinger.7608/ also shows pads with reversed D and S on the pad.
  7. C

    Correct orientation of JFET in Six String Stinger

    https://www.mouser.de/datasheet/2/308/1/MMBFJ202_D-2316065.pdf Looking at the sheet it actually looks like the transistor is tagged wrongly. D should be at the right and S at the left (when the pad side with the transistor is facing up). I checked with the multimeter, and the D on the pad has...
  8. C

    SOLVED Six String Stinger

    What do you mean by re-seated? Can you confirm they had the right orientation in your pictures?
  9. C

    Correct orientation of JFET in Six String Stinger

    It's the first time I make a build of something with these kind of transistors (gotten from Musikding.de). Not sure how to orient them, can somebody please advise? Should the face of the JFET, that is now facing up, point towards the power or the footswitch?
  10. C

    Wiring for 3PDT Order Switch board?

    I’m confused. Both seem to have FX1 into FX2.
  11. C

    Dumble style sounds dual pedal

    Would this work https://www.taydaelectronics.com/mini-toggle-switch-spdt-on-on-with-lever-handles.html? Perhaps covering one of the the rows (which one?)?
  12. C

    Dumble style sounds dual pedal

    My bad, I see there are also non-foot 3PDT switches. Perfect, thanks!
  13. C

    Dumble style sounds dual pedal

    interesting, and that is controlled via a 3PDT? How do you know the order that is engaged? 3PDT are not great at "displaying their state", that's why we use LEDs after all.
  14. C

    Dumble style sounds dual pedal

    I'm going into the Dumble sound rat hole, and before the Gladio is available to pedalpcb (I'm optimistic), I am thinking about building myself the Six String Singer and the Phoenix Ultra. I am also thinking about putting them into the same box, as a dual overdrive. This brings me to two...
  15. C

    Kliche Overdrive with 6 pin footswitch

    This Reddit post shows a direct wiring without the footswitch board that’s using only 6 pins, so I’d assume (without necessity to be right…) I can go about it by just assuming the central unused pins column is what I am missing?
  16. C

    Kliche Overdrive with 6 pin footswitch

    I put together a Kliche Overdrive and I have a 6 pin footswitch. The build documentation shows wiring with the footswitch board and I see 6 connections are needed, so I d assume that is doable. I also saw in another thread that it’s possible but the led wouldn’t work (it was a general question...
  17. C

    Kliche

    Which capacitor did you socket to make it fuller?
Back
Top