Search results

I am not sure, I may have had them sitting around for some time. It could have been any of 5 or 6 places /shrug PS: Definitely not a kit. Sorry : (

Hey man, we got it working! The PF5102 in Q5 (which I replaced with another PF5102 at one point) needed to be replaced. I replaced Q5 and it kind of worked (It sounded like a TV tuned to static) but when I replaced both of the PF5102 (Q1 & Q5) that fixed it. I guess all the PF5012 I got were...

Sorry for the long reply! I put together a probe and here is where I think the issues is. Filter Pot - Working R24 - Working C19 - Working C18 - Only the bottom works (Replaced, same result) R25 - Only the top works Q5 - Only the pin all the way to the right works from the component side...

Hello all, First off, I greatly apologize for coming here again for the same board. 1- History: I bought 4 original boards to build. I built one and had issues. So I came here for help but eventually gave up on the build ( I will detail the issues later ). The three left were graciously...

Hello all, I have 3 pcbs from the first run. Is it possible to get them to work or should I just buy some new ones? Thanks!

Enclosures! They were the only place to get a variety of colors outside of PPP which is out of the reach for regular Joes.

Cool, thanks.

Hello all, I am building the Triangle version of the Muffin Fuzz and am having trouble finding two parts. 50nF and 4nF capacitors. I assume they are box film crossing the circle like the rest. Even Mouser doesn't have them : (

Side note, on the iron side I like to put the corner of iron tip into the hole as much as possible. On the rare occasion that I just can't get the solder out I use a Thumb Drill to carefully drill out the hole...

This one is INCREDIBLE. I hated hated hated solder sucking but this makes it not bad at all. The silicon headpiece is great as you can jam it in to all sorts of hot places...

Ahh, I normally go over my resistors but didn't this time till you mentioned it. I found a mistake early on. I had a 22k in a 360k slot. I don't have any 360's only 330 and 390. I put a 330 in there and it is more up to volume. When I get some 360s I will swap it out. Thanks!

Hello all, It's your favorite idiot again. I just built a Seabed Delay and it is super quiet. I compared it against a Disaster Report Jr.(I built) and a Dispatch Master and it is much much quieter. I replaced the TLO72 with a OPA2134 to try to help. It sounds a touch better I think with less...

Which one are you suggesting. There seems to quite a few of them :)

Bump. Sorry to badger : (

Thanks! for more clarification. I just never knew you could have different types with the same value. I had just never saw a uf in a box film.

Hello all, I just built one of these and am having some problems. 1. The pass through works fine so I assume the wiring is ok. Assuming these are on one at a time: 2. The boost works fine and the LED lights up. 3. The octave doesn't change the sound at all but the LED lights up. 4.The boost...

Are clipping diodes different? I am building the Parentheses Fuzz and what looks to be the status LED's are like symbol 1 but there is one that has the square pad under the A. What do I do with those? Thanks!

That they are. In general though aren't Xu caps electro? And Xn film caps? Not being snotty, just want to make sure I get it right. Also there are many other 1u rounds caps in the build. ie C20 is 1u but electro and all there are 1n for film. Other than the markings on the PCB how would you...

I am building the Parentheses Fuzz pedal and I am confused. Capacitor C22 is listed in the components as 1u but on the PCB it is a double box. Anyone have any insight?

Whoa! That is a great tip. I will definitely remember that one. Both the Hoof and the Cloven Hoof have pretty much the same values /shrug I checked the values on the components again also. This is a strange one.