I recently build quite some pedals using Robert’s superb PCBs. Here’s 10 of them. ![Wink ;) ;)](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Left to right:
- Abider
- Fordoble
- Mystery Meat
- Duocast
Left to right:
- Cattle Driver
- General Tso’s
- Paragon Mini
- Modus Operandi
- Cobbler
- Special overdrive
I will detail some of them below.
I also re-housed some older pedals (non PPCB), left to right:
- Zendrive with a switch for higher/lower gain (1M gain pot and switching to 500k with 1M resistor across outer lugs and modifying pico caps)
- OCD with led and germanium clipping. Enclosure is not a chromium but a hand polished aluminium one
- Honey Bee
![CB54F576-6A24-4D4A-8BD8-089BBC0354A2.jpeg CB54F576-6A24-4D4A-8BD8-089BBC0354A2.jpeg](https://forum.pedalpcb.com/data/attachments/42/42204-5f74e0dac46cb7afa893d1891309a1b6.jpg)
Left to right:
- Abider
- Fordoble
- Mystery Meat
- Duocast
![EE8A2110-DC9B-44A5-B244-1E7BE75465B3.jpeg EE8A2110-DC9B-44A5-B244-1E7BE75465B3.jpeg](https://forum.pedalpcb.com/data/attachments/42/42205-1969bbef4378a1520a8cc8a2bcac69d4.jpg)
Left to right:
- Cattle Driver
- General Tso’s
- Paragon Mini
- Modus Operandi
- Cobbler
- Special overdrive
I will detail some of them below.
I also re-housed some older pedals (non PPCB), left to right:
![2A3D9109-0C00-4A7F-812C-EC6A1AAFF058.jpeg 2A3D9109-0C00-4A7F-812C-EC6A1AAFF058.jpeg](https://forum.pedalpcb.com/data/attachments/42/42206-e615e658f88deab7e981a5935f34868d.jpg)
- Zendrive with a switch for higher/lower gain (1M gain pot and switching to 500k with 1M resistor across outer lugs and modifying pico caps)
- OCD with led and germanium clipping. Enclosure is not a chromium but a hand polished aluminium one
- Honey Bee