CONTEST $100 Small Bear Gift card

[benny_profane]

Does anyone know another source for the mini chicken head knobs?

Bit different than the SBE ones, but here’s an option:

https://www.tubesandmore.com/products/knob-chicken-head-mini-high-quality-brass-insert-set-screw

EDIT: @fig beat me to it.

 

[Harry Klippton]

Knob - Chicken Head, mini, high-quality, brass insert, Set Screw | Amplified Parts

High quality miniature chicken head knob with set screw for smaller applications. 0.90" long nose to tail. Mini Davies 2300 clone.

www.amplifiedparts.com

Bit different than the SBE ones, but here’s an option:

https://www.tubesandmore.com/products/knob-chicken-head-mini-high-quality-brass-insert-set-screw

EDIT: @fig beat me to it.

Phew thanks fellas

 

[SYLV9ST9R]

Phew thanks fellas

Another (Canadian) option. A tad more pricey, but might depend with US shipping...

Chicken Head Mini Knob - Premium (Choose Colour)

Mini chicken head knobs with a brass bushing. Available in a variety of colours. Sold individually.

nextgenguitars.ca

 

[matt3310]

More knobs!!!

 

[Bobbyd67]

Resistors!!!! Of course!!! a shit ton of them At least 95$ worth! And 5 bucks of ceramic caps ! The cheaper the better !!

 

[scheffehcs]

Love the small bear 125b. Lots of those. Harder to find ICs, and lots of transistors for sure. Sad to hear they’re retiring!

 

[mjh36]

I'd spend it all on LED's. I've had an idea for a National Lampoon's Christmas Vacation themed pedal that'll wake up the neighbors.

 

[finebyfine]

c̸̡̛̛̺̬̙̩͉̠͎͈̲͙͌̍̍͗͊̒̄̌̓̈̔̊̃͊̓̅̽̉̑̐̽̔͒̅̈͒̽́̒̉̀́̓͂̈̂̉̌̈́̅͘͝ơ̸̢̡̗̬̳͉͎̳͇͓͉̰͈̆̈́̔̄͋͂̅̂͒̆̑̎̏̈̒̆̉̑̋̍̾̓̀̒͆̇̉̔̀̎̾̎͘̚͝ǹ̵̛̛͉͈͈͈̠͖̞̫̮̜̼͙̻̣̻͍̲̯̺̻͍̤̲̜̻̱̫̗͖̮̇̆͑͜t̷̡́̂̎͋͛̌̈́͑̾̀͛̓̾̒͋̽̑͋̈̽͒̕͝͝e̷̫̥̜̥̮͔̦͚͆̇̾͜͝m̸̨̗̤̜̟͕͎̪̪̗̟̤̻̙̺͒͂͛̉̑̒͒̈̓͘͝ͅp̶̛̲̳̺̪͓̿͛̏͌̐́̌̋͝o̸̧̧̨̧̨̥͍̲̦̜͇̳̬̮̹̳̭̱̱̜͖̙̰̠̜̟̜̗͕̯͙̣͉̹͕̥̫͕̞̻̩̮͙͈̙͐̄͒͒̀̈́̌̈́̇̏͒͋͐̈́̿̏̄̍̏̉͑̒͘̕͘͘͜͝͝ͅ ̵̧̡̨̨̢̛̛̱̱̤̳͚͇̜̰̱͉̺͕̼͔͙͖͖͙̤̝͇̗̗̘̠̭̹̫͈̭̬̱̤͕̒͒̓̓͒́̾͋̍̈́̏̄͋̆̿̓̈́͊͑̓͗̏̇͌͂̿͐̎͒̀̀̅̌̾̽͌͂̊̊͊̄̎̅̈̕͠ͅk̵̢̹̮̭̲͕̹͔̤̙̹̬̜͔͔̻̲̳̥̫̗̬͍͕̹̩͈̗̤͖̦̥̇͗̀͗̌̾̀̊̎̅̏̏̑̽́͐̽̈́̿̌̐͘̕͘n̷̨̧͇̫̳͍̫̘͉̩̠̯̗̞̤̻̥̗̝̮̺͓̥̰̣̎̇͑̀̓͌̎̿̈́́͒̅̈́̓̒̄̈́̆̿̽͒̐͋͒͆̃̈̚͘̕̕̚o̸̖͔̿̏͝b̸̢̨̨̨̭͉̱̝̹̺̺͍̠̳̬͉̲̻͓̭̹̹̩̥̱̪́́̕̕͜s̴̨̡̨̤̹̦͎͔͙̬͚̦̳̭̹͚̺̗̖̮͖̯͙͓̹̙̞̹̫͐̌̊͑͑̉̽̔̀͐̓͋̔́̃̓̅͛̒̆̎̔̏̀̃͋̆̄̿̓̀̈́̄͛̾̕͝͠͝ͅ

 

[ExpensiveDinner]

I'd get some germanium transistors and some vc2159d... need them for the milk box compressor but can't find anywhere that ships to NZ

 

[Feral Feline]

I'd buy strictly rarities such as :
— Meatbox chips, the M51134P;
— Compressor chips for AMZ's Q&D, the SSM2166;
— Transistor array chips
— metal-can op-amps
— Whatever Fuzz Face and Tone Bender sets of transistors aren't already picked over
— BOOKS! Knowledge is power, and power corrupts...
— Wah inductors
— Vactrols
— Tropical-fish caps
— ETC...

Alas, most of the money would go to $₶৲₽₱৲₦₲.

 

[Diynot]

Knobs, knobs, and more knobs. Mostly the big muff repros and the little colored aluminum ones that work so well for a 6 knob job. Also some of their matched tranny sets. I have yet to build a tone bender….

 

[Bobbyd67]

We all know Tayda is the resistor spot. Don’t waste Small Bear money on resistors!

I was joking around of course

 

[Fuzzonaut]

Fishy caps, shiny knobs, funky diodes, smelly transistors and ALL THE M51134Ps !!!!

 

[carlinb17]

Does anyone know another source for the mini chicken head knobs?

Knob - Chicken Head, Mini, High-Quality, Brass Insert, Set Screw Color: Red

<p>High quality miniature chicken head knob with set screw for smaller applications. 0.90" long nose to tail. Mini Davies 2300 clone.</p>

www.musicalinstrumentshoppe.com

 

[ianmarks]

I'd buy strictly rarities such as :
— Meatbox chips, the M51134P;

.....good one. Lectricfx had a project for that at one point. Never got around to it though.

 

[benny_profane]

.....good one. Lectricfx had a project for that at one point. Never got around to it though.

They still sell it.

 

[NickC]

I'd buy hundreds rubber feet for my pedals

 

[TheSin]

Just placed a small order with them when I read that they were closing, but could still use some enclosures.

 

[caiofilipini]

Some germanium transistors I haven't tried yet, some fancy caps, and a lot of fancy knobs.

 

[Raspymcnasty]

Ics, enclosures, diodes, honestly everything. I love small bear I’m hoping sometime as passionate would take over