pricklyrobot
Well-known member
Had these two Aion boards sitting around for quite a while. Finally wrapped them up.
This the Ceres (aka Catalinbread Sabbra): Rangemaster + plus Laney Supergroup ‘ampinabox’.
Features the Northern Harrier, an excellent bird of prey, found throughout North America. If you see something raptor-like cruising low over a field, there’s a good chance it’s this guy.
www.allaboutbirds.org
Initially I got the optional 18V 3PDT board from Aion. Then I thought it’d be cool to have a 9/18V switch. Didn’t seem like it warranted an external control, so I was trying to figure out some scheme involving a floating toggle or some such. Then I discovered the much tidier PPCB option https://www.pedalpcb.com/product/3pdt-chargepump/ and there was that sorted nicely!
Gaia mkII (Catalinbread Galileo II) up next. This is Rangemaster + AC30.
This one features an Osprey. Famous fish-grabbing guy, found world-wide!
www.allaboutbirds.org
Got lucky on this one and the Volume pot lined up to where I could solder straight to the board. Saved me a little bit of offboard wiring and now the PCB’s not floating. Yay!
Eagle-eyed viewers will notice I lightly toasted that one cap while I was doing the Tone pot wiring. Been a while since I did that
But I tested it, and it seems to still be Farad-ing like a a champ, so I left it in.
Need to spend some more time playing both of these. Haven’t magically started playing like Iommi or May yet, maybe that’s on the 18V…
This the Ceres (aka Catalinbread Sabbra): Rangemaster + plus Laney Supergroup ‘ampinabox’.
Features the Northern Harrier, an excellent bird of prey, found throughout North America. If you see something raptor-like cruising low over a field, there’s a good chance it’s this guy.
Northern Harrier Overview, All About Birds, Cornell Lab of Ornithology
The Northern Harrier is distinctive from a long distance away: a slim, long-tailed hawk gliding low over a marsh or grassland, holding its wings in a V-shape and sporting a white patch at the base of its tail. Up close it has an owlish face that helps it hear mice and voles beneath the...
Initially I got the optional 18V 3PDT board from Aion. Then I thought it’d be cool to have a 9/18V switch. Didn’t seem like it warranted an external control, so I was trying to figure out some scheme involving a floating toggle or some such. Then I discovered the much tidier PPCB option https://www.pedalpcb.com/product/3pdt-chargepump/ and there was that sorted nicely!
Gaia mkII (Catalinbread Galileo II) up next. This is Rangemaster + AC30.
This one features an Osprey. Famous fish-grabbing guy, found world-wide!
Osprey Overview, All About Birds, Cornell Lab of Ornithology
Unique among North American raptors for its diet of live fish and ability to dive into water to catch them, Ospreys are common sights soaring over shorelines, patrolling waterways, and standing on their huge stick nests, white heads gleaming. These large, rangy hawks do well around humans and...
Got lucky on this one and the Volume pot lined up to where I could solder straight to the board. Saved me a little bit of offboard wiring and now the PCB’s not floating. Yay!
Eagle-eyed viewers will notice I lightly toasted that one cap while I was doing the Tone pot wiring. Been a while since I did that
Need to spend some more time playing both of these. Haven’t magically started playing like Iommi or May yet, maybe that’s on the 18V…