I just recently finished my build of the PedalPCB Abyss (EQD The Depths) and I realized I only have one slot left on my power supply. The slot runs 18V. I know the Depths can run from 9V-18V, so I assume that the Abyss will as well. Can anyone confirm this before I damage the circuit? Thanks!
Abyss 9V-18V?
- Thread starter rjpenny16
- Start date
Cybercow
Well-known member
If you want to run the Abyss at 18v, be sure the electrolytic caps are at least 25v.
35v to 50v is preferable. Anything less than 25v electrolytic caps at 18v runs the risk of blowing the caps. And considering the 100µF cap is part of the power supply filtering, I'd use nothing less than a 35v electrolytic cap there.
35v to 50v is preferable. Anything less than 25v electrolytic caps at 18v runs the risk of blowing the caps. And considering the 100µF cap is part of the power supply filtering, I'd use nothing less than a 35v electrolytic cap there.
