UnusualMuse
New member
Does anyone have a Tadya drilling template (and/or a UV printing template!) for the newer version of the Aion L5 preamp pedal? Thanks!
John
John
REQUEST Aion L5 Preamp (Newer 9vDC Version) Drilling Template?
- Thread starter UnusualMuse
- Start date
Synchrony Pedalworks
Well-known member
I've got the template for the drive channel for the L5 Preamp. If that is the version you need, I'd be happy to share the UV printing file.
Phil hodson
Well-known member
I used the drill template from Aion and added it to illustrator for my UV print.
I then used used a printed copy of the drill template and did it off school with my drill press. Seemed to work out perfectly!
There is a lot of holes to drill though!!
I then used used a printed copy of the drill template and did it off school with my drill press. Seemed to work out perfectly!
There is a lot of holes to drill though!!
Synchrony Pedalworks
Well-known member
done.Would be cool to share!
UnusualMuse
New member
That looks fantastic! Would you be willing to share the Illustrator file you used for the UV printing?
Last edited:
Phil hodson
Well-known member
Of cause. See attached and let me know how you get on.
If you want the Illustrator one then drop me a PM with your email and I can send it onto you. I cant seem to attach it here.
UnusualMuse
New member
Thanks! I tried to send you a DM, but it won't let me start the convo because it thinks I'm a bot... can you try DMing me and I'll reply with my email?
Tassieviking
Active member
If you can't attach the file it is most likely not a supported file on this site, just add .PDF to the file ending.
Don't rename the file itself but place the .PDF after the .AI or whatever the file extension is. (File.AI.PDF)
We just have to remove the .PDF once we download it and all is good.
We would all like to see the file, especially me as I'm trying to learn how to make Tayda artwork for my boxes and the more examples I can find the better it is.
The only drawback for me is I will have to build the pedal for myself now.
Cheers
Mick
Don't rename the file itself but place the .PDF after the .AI or whatever the file extension is. (File.AI.PDF)
We just have to remove the .PDF once we download it and all is good.
We would all like to see the file, especially me as I'm trying to learn how to make Tayda artwork for my boxes and the more examples I can find the better it is.
The only drawback for me is I will have to build the pedal for myself now.
Cheers
Mick
Phil hodson
Well-known member
Hi Mick
See attached and let me know how you get on.
If you cant use it just PM me your email.
Phil
See attached and let me know how you get on.
If you cant use it just PM me your email.
Phil
Tassieviking
Active member
Thanks, that works fine as soon as I remove the .PDF on the end.
Phil hodson
Well-known member
Good to know!
UnusualMuse
New member
It worked!! Thanks, Phil!
I did one for the L4 bass preamp version of this - which is the same except the L5 has two more knobs than the L4. I added those two holes and here you go:
Not verified yet but I'll hopefully be ordering the bass version here pretty soon.
Not verified yet but I'll hopefully be ordering the bass version here pretty soon.
Similar threads
