Best Clean Fender AIAB

A

ac30irons

Active member
Hey all, opinions please.

What do you feel is the best clean Fender AIAB, ideally with a 3 band tone control. I’m looking for something with as much clean headroom as possible.

In my obsession to find something HiWatt related and an absolute absence of a schematic for anything close, my plan is to take a clean Fender, and change up the tone stack to something Watty.

Thanks in advance
 
I was going to suggest https://www.pedalpcb.com/product/pcb609/, but I'm not sure how clean it really is, and it might be more on the early Marshall side than the Bassman.

https://www.pedalpcb.com/product/pcb333/ is apparently supposed to be a Hiwatt style tone, but again, I think it's more on the overdriven side than clean.

For some reason I thought https://forum.pedalpcb.com/threads/crazy-tube-circuits-hi-power.20875/ was going to be a PCB, but apparently I imagined it - maybe mixed it up with the MIGFET.

https://dirtboxlayouts.blogspot.com/2020/02/baja-hiwatt-dr103-amplifier-pedal.html might also be one option, although it seems like it might be a complicated build.

I'm afraid I can't give any actual clean Fender AIAB recommendations since I don't have any of those, but best of luck in your search!
 
Fama said:
I was going to suggest https://www.pedalpcb.com/product/pcb609/, but I'm not sure how clean it really is, and it might be more on the early Marshall side than the Bassman.

https://www.pedalpcb.com/product/pcb333/ is apparently supposed to be a Hiwatt style tone, but again, I think it's more on the overdriven side than clean.

For some reason I thought https://forum.pedalpcb.com/threads/crazy-tube-circuits-hi-power.20875/ was going to be a PCB, but apparently I imagined it - maybe mixed it up with the MIGFET.

https://dirtboxlayouts.blogspot.com/2020/02/baja-hiwatt-dr103-amplifier-pedal.html might also be one option, although it seems like it might be a complicated build.

I'm afraid I can't give any actual clean Fender AIAB recommendations since I don't have any of those, but best of luck in your search!
Click to expand...
Cheers dude ! I have actually done the Bajaman one and have a PCB for it. Unfortunately it’s wildly unstable (it’s quite well documented.) People have tried to de-bug it with no luck at all !
 
Not sure if that's what you are looking for, but you can check ROG Azabache project, maybe also read the reviews on musikding.

www.musikding.de

ROG Azabache AmpSim kit, 34,00

Amp simulation
www.musikding.de www.musikding.de

You will also find some mods here :

Chuck D. Bones

Thread 'This Week on the Breadboard - ROG Azabache'

I had been meaning to breadboard this one for some time now, finally got around to it during a break from compressors. I built it by the book, except I used fixed resistors (3.3K, 15K, 15K 15K) instead of trimpots and auditioned JFETs until I hit the recommended drain voltages. I tried a couple of mods: asymmetric clipping on stage 3 and increased gain on stage 2, but neither sounded as good as the original design. I am not a fan of the cab sim at the tail end, makes it sound too thin. This circuit would benefit from a PRESENCE control after Q5. It's a clever design, similar to some...
  • Like
  • Love
 
You must log in or register to reply here.
Back
Top