Big Muff Man OH YA

[Popnfreshbass]

I used the op amp style graphics, but the green russian specs for the guts. Also I really like the look of these LED bezels…But I don’t heatshrink my LED leads and it’s dangerously close to touching. Going back to plastic next pedal. Turns out I also didn’t have as many sockets left as I thought so transistors went in bareback

 

[Mentaltossflycoon]

The price is crazy and I think they're splined shaft only but......

3D Printed Knobs

1 x Custom 3D printed Knob Fit tight on 6mm splined shaft pots -Mr Sparkle -Duff Beer -Steamed Ham -MexiCan -Booty Sweat -Bender Head -Bender Brau -Tegridy Farm

gojira.co.uk

 

[Popnfreshbass]

The price is crazy and I think they're splined shaft only but......

3D Printed Knobs

1 x Custom 3D printed Knob Fit tight on 6mm splined shaft pots -Mr Sparkle -Duff Beer -Steamed Ham -MexiCan -Booty Sweat -Bender Head -Bender Brau -Tegridy Farm

gojira.co.uk

Those would be perfect, but man are they pricey!

 

[fig]

Oh Ya!

 

[Bricksnbeatles]

Still pricy, but you can get 3 for £20 instead of £10 each

3D-Printed Duff Beer Knobs (3 for £20)

3 x Custom 3D-printed Duff Beer Knobs Give your pedal a facelift! Fit tight on 6mm splined shaft pots.

gojira.co.uk

 

[HamishR]

I think soldering the transistors in on a pedal like this is a good idea. I've had too many issues with transistors coming loose in the past. And I think you're unlikely to need to swap transistors out in a Big Muff. The only time I want to use transistor sockets is on Ge trannies. They often need plenty of experimentation!

BTW - and this goes for most Muffs - if you want to try a creamier sound you can try lower hfe transistors like a 2N3904 or even a 2N2222A. Still plenty of gain but a juicier, creamier feel/sound. It can be fun to try these little tricks.

 

[HamishR]

Yeah the low gain trannies in a Muff can be fantastic, can't they?

 

[Chuck D. Bones]

Those would be perfect, but man are they pricey!

No one here has a 3-D printer?

 

[fig]

No one here has a 3-D printer?

I think 3-D printers cost more than the knobs Chuck.

Lame joke aside,
I do recall someone having one. @dawson maybe?