Bodhizafa Analog Reverb

[Dostradamas]

Big thank you to the designer for this!!!!



Easy to follow instructions with a well laid out kit.

Sounds glorious, quiet and more drip, sproink, and boing than any surf sound could need.

Instant silent switching between mix settings is very nice for standard verb and PSYCHO SURF settings

I went with the Long Mojo Tone tank recommended as well as the 12 volt 3A power supply.

After playing with it a while I decided to give the heat sinks some air flow to assist in cooling.

I think a dedicated pedalboard for these with the tank inside and underneath is in the future.

 

[SpringReverbFan1234]

When I was building mine I started calling it the "Bod" in my head. Then I remembered this and had to look it up:

 

[Dostradamas]

When I was building mine I started calling it the "Bod" in my head. Then I remembered this and had to look it up:

 

[jubal81]

That's Bodhi. They call him Bodhizafa ...

 

[jubal81]

Nice job, bud!
Glad it was a smooth one!

 

[Dostradamas]

That's Bodhi. They call him Bodhizafa ...

So I think you misheard

Bodhisattva - Wikipedia

en.wikipedia.org

They sound the same

https://imsdb.com/scripts/Point-Break.html

I forgot James Cameron co wrote that script

 

[Dostradamas]

True bypass looper and power switch came in handy with this setup

 

[jubal81]

So I think you misheard

Bodhisattva - Wikipedia

en.wikipedia.org

They sound the same

View attachment 121405

https://imsdb.com/scripts/Point-Break.html

I forgot James Cameron co wrote that script

You've probably seen them in the grocery store.
Point Break is one of my favorite movies and Georgetown brewing had some fun with the character names. As a former editor, those jokes amuse me.

 

[andare]

 

[Dostradamas]

Whew it worked

 

[andare]

Whew it worked
View attachment 121577

Am I senile or is this just fuzz with tremolo? Where's the drip reverb? Make it surf, man!

 

[Dostradamas]

Am I senile or is this just fuzz with tremolo? Where's the drip reverb? Make it surf, man!

Maybe?

Not a great example but my first uploaded video and sound sample so I have plans to do a more in depth sound cross section.

When you A/B it there is a tremendous difference with out the verb, it puts a shiny, spanky coat on everything and shimmers the back edge of each chord.

This thing has so much drip and brightness at the top end it is over the mountain for me most of the time, 65% on the mix and about 60% on the dwell is plenty surfy drippy for me.

 

[andare]

Maybe?

Not a great example but my first uploaded video and sound sample so I have plans to do a more in depth sound cross section.

When you A/B it there is a tremendous difference with out the verb, it puts a shiny, spanky coat on everything and shimmers the back edge of each chord.

This thing has so much drip and brightness at the top end it is over the mountain for me most of the time, 65% on the mix and about 60% on the dwell is plenty surfy drippy for me.

Turn off everything else and just play palm muted notes down low. Let us hear those sweet drip tails.

 

[Dostradamas]

Turn off everything else and just play palm muted notes down low. Let us hear those sweet drip tails.

Like I don't know

I will add it to the list

 

[ThomasAvenue]

Big thank you to the designer for this!!!!

View attachment 121387

Easy to follow instructions with a well laid out kit.

Sounds glorious, quiet and more drip, sproink, and boing than any surf sound could need.

Instant silent switching between mix settings is very nice for standard verb and PSYCHO SURF settings

I went with the Long Mojo Tone tank recommended as well as the 12 volt 3A power supply.

After playing with it a while I decided to give the heat sinks some air flow to assist in cooling.

I think a dedicated pedalboard for these with the tank inside and underneath is in the future.


View attachment 121384View attachment 121383View attachment 121385
View attachment 121386

Just finished my build and really digging it! Where did you get those small form factor I/O jacks? I spaced mine a little poorly when drilling so the Switchcraft jacks I tried to employ can't seat properly...
That and I don't have a good, very low profile switch.

 

[Dostradamas]

Just finished my build and really digging it! Where did you get those small form factor I/O jacks? I spaced mine a little poorly when drilling so the Switchcraft jacks I tried to employ can't seat properly...
That and I don't have a good, very low profile switch.

Lumbergs, I love em

1/4" Mono Jack - Lumberg KLBM 3

Same day shipping and awesome prices for guitar pedal parts! A family owned business with AMAZING customer service.

lovemyswitches.com

Pro-Grade SPST Momentary Foot Switch - Normally Open - Soft Touch - Solder Lug

Rely on the switch used by professional builders. Our “pro-grade” SPST momentary foot switch is normally open with solder lug terminals and whisper-soft click.

lovemyswitches.com

Not low profile but it fit under the heat sinks for me

Not the cheapest but same day shipping and I am close so next day for me

 

[ThomasAvenue]

Lundbergs, I love em

1/4" Mono Jack - Lumberg KLBM 3

Same day shipping and awesome prices for guitar pedal parts! A family owned business with AMAZING customer service.

lovemyswitches.com

Pro-Grade SPST Momentary Foot Switch - Normally Open - Soft Touch - Solder Lug

Rely on the switch used by professional builders. Our “pro-grade” SPST momentary foot switch is normally open with solder lug terminals and whisper-soft click.

lovemyswitches.com

Not low profile but it fit under the heat sinks for me

Not the cheapest but same day shipping and I am close so next day for me

Awesome, thanks!