I just built one (in a 1590xx) and I am really diggin it, great pedal! Any chance both pcb’s get combined into one so it can fit into a 1590BB? Thanks!
I just built one (in a 1590xx) and I am really diggin it, great pedal! Any chance both pcb’s get combined into one so it can fit into a 1590BB? Thanks!
currently working this up. Gonna be tight! In the original protein wish list thread there was mention that a dual pcb is on the way which is good because I’ll likely never want to do this again.
currently working this up. Gonna be tight! In the original protein wish list thread there was mention that a dual pcb is on the way which is good because I’ll likely never want to do this again.
Even though I’m not a huge fan of the 1590xx (too large of a footprint), I’m gonna stick with it for now. I do hope a combined pcb hits the market like you mentioned.
Good luck and let us know how it goes.
Started filling the enclosure tonight. Already decided to ditch the order switch and I think this has a 15% chance of working. I will likely need that spacer to add some depth to the enclosure.
On second thought I went ahead with the order switch and decided to side mount the jacks. Wiring it up tonight. Everything fits fine except my electrolytic caps might be just too tall
Well I finished the pedal but now the adventure continues in the troubleshooting forum.... made some silly mistakes once I got it all in there and might have messed something up.
Well I finished the pedal but now the adventure continues in the troubleshooting forum.... made some silly mistakes once I got it all in there and might have messed something up.
I actually fit everything in height and width wise it’s the depth that was the issue which is why I need the adapter. I think the way I did the led wiring bypassed the CLR which popped my leds.