I'm having an issue with my Byzantium where I'm not getting flanging effect. When enabled, all I hear is the input signal and none of the knobs or trim pots change anything.
I used an audio probe and noticed that there was audio going into the V3207D chip (pin 3) but no audio going out (pins 7/8). I was also expecting the V3102D chip to make some sort of noise (pulsating) by I don't hear anything when probing any of the pins. I checked the voltages of both chips and they seem reasonable, but if that would help let me know and I can post them.
I'd appreciate any help as I'm not sure what to check exactly and why there would be absolutely no sound coming out of the V3207D. It's also my first time using these chips, so I'm not sure what to look for.
Excuse the messy wiring between the boards.
I used an audio probe and noticed that there was audio going into the V3207D chip (pin 3) but no audio going out (pins 7/8). I was also expecting the V3102D chip to make some sort of noise (pulsating) by I don't hear anything when probing any of the pins. I checked the voltages of both chips and they seem reasonable, but if that would help let me know and I can post them.
I'd appreciate any help as I'm not sure what to check exactly and why there would be absolutely no sound coming out of the V3207D. It's also my first time using these chips, so I'm not sure what to look for.
Excuse the messy wiring between the boards.