UnusedPortion
Member
I just built a Captain Bit, and I am having an issue where the volume is very low, even with the Level Pot at 100%. I have already done the following:
Thanks in advance,
JB
- double checked the values of all resistors and capacitors
- swapped out the TL072 IC
- used an audio probe to track the issue to somewhere between pin 1 of the TL072 and leg 3 of the "Level" pot
- replaced the 1uf capacitor at C14 (which is between pin 1 of TL072 and the Level pot)
- confirmed continuity between pin 1 of TL072 and positive leg of C14 and continuity between negative leg of C14 and leg 3 of the level pot
Thanks in advance,
JB