devanbumstead
Member
I’d like to install a Pinstripe DISO+ (with the polarity rev switch) on my pedalboard but I need to control the polarity switch externally through one of the function switches on my PBC6X.
I confirmed with Pinstripe that the installed polarity toggle is a DPDT switch. In theory, could I use this relay circuit to accomplish this?
(Not sure if I need the latching or non-latching)
Not sure if there’s space inside, but ideally it would be great to build it into this enclosure, still leave the existing toggle in place, and simply install a 1/4” jack to connect a cable to the PBC6X. But I’m not opposed to building a small external box if need be.
I confirmed with Pinstripe that the installed polarity toggle is a DPDT switch. In theory, could I use this relay circuit to accomplish this?
Not sure if there’s space inside, but ideally it would be great to build it into this enclosure, still leave the existing toggle in place, and simply install a 1/4” jack to connect a cable to the PBC6X. But I’m not opposed to building a small external box if need be.
