FloydianPulse
New member
Hi all,
I built the El Sol and squeezed it down to a 1590A and the LED works great but no sound is coming out of the pedal when activated. Bypass works fine. I used an audio probe and found the following: Any ideas where I should go next?
While activated, the red circles have no sound, and circled points added to the circuit diagram.
Thanks for the help!
edit: primary concerns are if all 3 potentiometer points should have audio? Why would I have audio at center pot connection but not on output?
I built the El Sol and squeezed it down to a 1590A and the LED works great but no sound is coming out of the pedal when activated. Bypass works fine. I used an audio probe and found the following: Any ideas where I should go next?
While activated, the red circles have no sound, and circled points added to the circuit diagram.
Thanks for the help!
edit: primary concerns are if all 3 potentiometer points should have audio? Why would I have audio at center pot connection but not on output?
Last edited: