diezelmonster666
New member
Hey guys,
I am currently building my first Electrovibe and I have got all together. The result is a bit frustrating, since:
- In Chorus I only get a really low volume, non-effect sound (unity gain mod is applied)
- In Vibrato I get no sound at all
- The lamp is pulsating well, so no issues here
- Bypass works
- Some of the transistors have weird values when I measure them. Most are running at 12V, but some are at 9V (Q10), 7.9V (Q6), 2.2V (Q5), and even 1,9V (Q15)
Any possible troubleshooting from someone who has successfully built that board? I am happy to provide images and voltage readings. My soldering skills are pretty good, since I actually do that for a living (on non-music PCBs )
Thanks in advance!
I am currently building my first Electrovibe and I have got all together. The result is a bit frustrating, since:
- In Chorus I only get a really low volume, non-effect sound (unity gain mod is applied)
- In Vibrato I get no sound at all
- The lamp is pulsating well, so no issues here
- Bypass works
- Some of the transistors have weird values when I measure them. Most are running at 12V, but some are at 9V (Q10), 7.9V (Q6), 2.2V (Q5), and even 1,9V (Q15)
Any possible troubleshooting from someone who has successfully built that board? I am happy to provide images and voltage readings. My soldering skills are pretty good, since I actually do that for a living (on non-music PCBs )
Thanks in advance!