EQD Plumes Flexi Switch

[Fingolfen]

I've recently built a plumes clone using the Greengage board, and honestly I really like the little bugger. According to Sweetwater, the pedal has a "Flexi-Switch" which "enables the use of momentary- and latching-style switching simultaneously." How would I replicate that????

Edit: Would something like this do it???

https://www.pedalpcb.com/product/relaybypass/

 

[Robert]

Yep, that's what you want.

 

[Fingolfen]

Yep, that's what you want.

Sweet! For the momentary should it be normally open or normally closed? Lovemyswitches is local, so I can get "stuff" in fast...

Also, how do you mount the PCB as it doesn't attach to the stomp switch?

 

[Mentaltossflycoon]

 

[Robert]

You want normally open.

You can either use hot glue like @Mentaltossflycoon suggested or connect the relay bypass module to the main effect PCB with rigid pinheaders (like these).

 

[Fingolfen]

You want normally open.

You can either use hot glue like @Mentaltossflycoon suggested or connect the relay bypass module to the main effect PCB with rigid pinheaders (like these).

Gah! Should have thought of the pin headers... I'll probably go with the latter as I've built several of the AionFX Lovetone clones and have controlling interest in them...

 

[Diynot]

I use good ol 3m double stick tape between the board and switch