Stickman393
Well-known member
Just put together this build. Everything works as it should, but I'm experiencing something strange with it...
Play a note, boom. Lovely arpeggios and wild stuff...but also intermittent static. It'll die out as the note sustains, but it sounds like crinkling a plastic bag in like 3-4 pulses in time with the arpeggios after I pluck. It's certainly more pronounced playing in lower registers. It's only occuring in the wet signal.
First off...I've gone over my solder joints, re-flowed everything, swapped the op amps, tried with a few different power supplies. No dice so far. The FV-1 was sourced from antique electronic supply.
Any ideas where to start here, or anybody experience anything similar with an FV-1 project? The 3.3v regulator, the crystal? Just start probing away?
Play a note, boom. Lovely arpeggios and wild stuff...but also intermittent static. It'll die out as the note sustains, but it sounds like crinkling a plastic bag in like 3-4 pulses in time with the arpeggios after I pluck. It's certainly more pronounced playing in lower registers. It's only occuring in the wet signal.
First off...I've gone over my solder joints, re-flowed everything, swapped the op amps, tried with a few different power supplies. No dice so far. The FV-1 was sourced from antique electronic supply.
Any ideas where to start here, or anybody experience anything similar with an FV-1 project? The 3.3v regulator, the crystal? Just start probing away?