DailyDovetails
Well-known member
- Build Rating
- 5.00 star(s)
This pedal sounds pretty much how I expected it to. I think the only surprise is that the boost is actually a little better than I had expected not that I imagine the boost that much. I have wanted one of these probably since the early 2000's as a Stephen Carpenter fan. More recently I have really enjoyed this pedal as used by both Electric Wizard and Monolord.
The build on this was a little more demanding than I had imagined it would be. Not really difficult especially if you go slow and measure the parts as you install them but there are a ton of tiny 1/8 watt resistors and electrolytic capacitors on this board.
I feel like after working on the process for a while I have a pretty good 3D printable pedal platform. I posted all the files to build this here https://www.thingiverse.com/thing:6492607 in case anyone else wants to give it a try. The only part I don't think I have really hatched out yet is the power supply diameter, I'm thinking in the future I might make the power supply hole larger and then make adapters for the different sized DC adapters.
I put some pictures I normally wouldn't include for a reference of how everything goes together. If there is an interest I will consider putting together the files for other pedals.
The build on this was a little more demanding than I had imagined it would be. Not really difficult especially if you go slow and measure the parts as you install them but there are a ton of tiny 1/8 watt resistors and electrolytic capacitors on this board.
I feel like after working on the process for a while I have a pretty good 3D printable pedal platform. I posted all the files to build this here https://www.thingiverse.com/thing:6492607 in case anyone else wants to give it a try. The only part I don't think I have really hatched out yet is the power supply diameter, I'm thinking in the future I might make the power supply hole larger and then make adapters for the different sized DC adapters.
![1708306824648.jpeg 1708306824648.jpeg](https://forum.pedalpcb.com/data/attachments/68/68892-4f817a5cec7d6c4a8cda50aad7a75e1e.jpg)
![1708306803885.jpeg 1708306803885.jpeg](https://forum.pedalpcb.com/data/attachments/68/68891-8f51adbb24d5854bb0fdb7b4f383fe76.jpg)
![1708306773258.jpeg 1708306773258.jpeg](https://forum.pedalpcb.com/data/attachments/68/68890-8656880ef9677eb47a450f849a170cf7.jpg)
![1708306876268.jpeg 1708306876268.jpeg](https://forum.pedalpcb.com/data/attachments/68/68894-403ecc6dce359e2cdb95df0b1231dcf6.jpg)
![1708306884873.jpeg 1708306884873.jpeg](https://forum.pedalpcb.com/data/attachments/68/68895-e547fd9051602ab68bc61cef619bb708.jpg)
![1708306898369.jpeg 1708306898369.jpeg](https://forum.pedalpcb.com/data/attachments/68/68896-3c9805ffab86eae2d1e8b13c44ebc64e.jpg)
![1708306907758.jpeg 1708306907758.jpeg](https://forum.pedalpcb.com/data/attachments/68/68897-04fc56e96397670fb2ae99101188658f.jpg)
![1708306916328.jpeg 1708306916328.jpeg](https://forum.pedalpcb.com/data/attachments/68/68898-ff66af3754799a9ce19e5d523b22bf26.jpg)
I put some pictures I normally wouldn't include for a reference of how everything goes together. If there is an interest I will consider putting together the files for other pedals.