ElReverendoRyan
Member
Hey gang, first time poster here, and first issue I’ve run into like this.
I’m building a low tide, and I’m not getting sound be it bypassed or not. Led lights up just fine. Not yet taken voltages as a prefer to do an audio proble first.
I’m running into trouble at the buffer stage. Didn’t have sk’s so I used j201, but realized I’d soldered too quickly and had the orientation wrong. In a panic took it out but the pads came with. My fault. Anywho.
So now I’m running jumpers from what I understand to be the correct points according to the schematic. If anyone wants to correct me feel free, that’s why I’m here!
G-R5 (have signal here)
S-Positive leg of C19 (no Signal)
D-leg 2 of Q2 (faint distorted signal, that same signal comes out of all 3 legs of Q2)
Any ideas? I probed around for shits and giggles, on the IC I’m getting that crappy signal everywhere all over the board so I definitely think somethings gone wrong with the buffer stage.
As for the bypass, I double checked and everything seems right, but I’ll definitely get around to re-doing the switch connection
I’m building a low tide, and I’m not getting sound be it bypassed or not. Led lights up just fine. Not yet taken voltages as a prefer to do an audio proble first.
I’m running into trouble at the buffer stage. Didn’t have sk’s so I used j201, but realized I’d soldered too quickly and had the orientation wrong. In a panic took it out but the pads came with. My fault. Anywho.
So now I’m running jumpers from what I understand to be the correct points according to the schematic. If anyone wants to correct me feel free, that’s why I’m here!
G-R5 (have signal here)
S-Positive leg of C19 (no Signal)
D-leg 2 of Q2 (faint distorted signal, that same signal comes out of all 3 legs of Q2)
Any ideas? I probed around for shits and giggles, on the IC I’m getting that crappy signal everywhere all over the board so I definitely think somethings gone wrong with the buffer stage.
As for the bypass, I double checked and everything seems right, but I’ll definitely get around to re-doing the switch connection