Missing Build Docs / Schematics

[temol]

I have the drill coordinates for tayda if you want them.

Thanks for your offer, it won't be necessary. I already have everything I need.

 

[tremolowe]

SCABBARD
---------------------
4 100R
1 1K
2 2K2
1 4K7
3 10K
1 20K
3 47K
3 1M

3 1n
1 3n3
2 10n
3 47n

3 1u MLCC
* Filtering/decoupling, use MLCC

11uF E
4 4u7
2 100u

2 D9B
1 5817

4 A100K

2 OP07

1 8.2uH
* https://www.taydaelectronics.com/8-2uh-inductor-ec24.html

1 ON/ON

I have the drill coordinates for tayda if you want them.

I'd like those coords, if you please. Scabbard is a definite future build from me! I'd love to see the schem for it too whenever that drops.

 

[zeropluszero]

Tayda Electronics Drill

Tayda Electronics Drill Designer for custom enclosures.

drill.taydakits.com

Scabbard (rev 1?)
Obviously check the diameter of your holes, but my PCB has dropped right into this.

 

[tremolowe]

Tayda Electronics Drill

Tayda Electronics Drill Designer for custom enclosures.

drill.taydakits.com

Scabbard (rev 1?)
Obviously check the diameter of your holes, but my PCB has dropped right into this.

Thank you very much, I appreciate it. I'd like to get one printed and drilled when I get around to that project so this is very helpful.

 

[Mbens11]

Thanks!

 

[StickyDingo]

@Robert - Synopsis schematic, pretty please?

 

[tcpoint]

Is there a drill template for the Salesman? I'm too lazy to make one.

 

[Robert]

@Robert - Synopsis schematic, pretty please?

It's in the doc.

https://docs.pedalpcb.com/project/Synopsis-PedalPCB.pdf

Is there a drill template for the Salesman? I'm too lazy to make one.

https://docs.pedalpcb.com/project/drill/1590BB-DrillTemplate-Salesman.pdf

 

[Phil hodson]

Hi Robers. Any chance of a drill temp for the 4 tap DC convertir/isolator. And the length of the standoffs requires. Thanks.