Old Dung Beetle PCB Cap Value Discrepancy?

[Idlebeach]

Hey! I got some pcbs from someone who wasn't going to finish them and a Dung Beetle was one of them. It seems like the layout changed a fair amount and one of the cap values is different.

Since I don't have the old schematic I can't tell if it's the same cap that changed.. Kind of looks like it might not be going to the same place? If for some reason someone has it that would probably help quite a bit.

Old PCB says 8n2 but the build doc matches everything except a 2n2.

Here's a pic for reference :





Thanks everyone! I appreciate you all!

 

[Robert]

The updated version of the PCB is designed from a newer trace of the original.

The build doc for your version of the PCB is here:

https://docs.pedalpcb.com/project/archived/Archived-DungBeetle.pdf

If you want to build it to the newer spec you'll want to:
Omit C7 (8.2nF)
Install a jumper in the place of R14 (4.7K)
Add a 2.2nF from Base/Collector of Q2

 

[Idlebeach]

The updated version of the PCB is designed from a newer trace of the original.

The build doc for your version of the PCB is here:

https://docs.pedalpcb.com/project/archived/Archived-DungBeetle.pdf

If you want to build it to the newer spec you'll want to:
Omit C7 (8.2nF)
Install a jumper in the place of R14 (4.7K)
Add a 2.2nF from Base/Collector of Q2

You are the best! Thanks a bunch for the info!