R Radkins80 New member Aug 15, 2020 #1 What is the lead spacing on the pcb's? Specifically the Triangulum boost. I have heard some say 2.5mm and some 5mm.
What is the lead spacing on the pcb's? Specifically the Triangulum boost. I have heard some say 2.5mm and some 5mm.
Nostradoomus Well-known member Aug 15, 2020 #2 Depends on the component. Film caps are 5mm, electro caps are 2mm...if the printed circle of the electro cap is bigger than the others it’s 2.5. Upvote 0 Downvote
Depends on the component. Film caps are 5mm, electro caps are 2mm...if the printed circle of the electro cap is bigger than the others it’s 2.5.
