Pelota 2 Delay (Sheepy Love & Dylan159)

MattG said:
I have five of these PCBs, minus the one going to @dcfvgb, I have four left free to whoever wants one. @bluedmc777 if you only need one I can save you the fabrication cost.
Click to expand...
In that case I'll hold off on the jlcpcb order, build the one first.
I've been looking for a good relatively affordable parts cost delay to build a 2 in 1 stereo/mono for fun without reinventing the wheel. If a a diehard analog delay fan loves a 2399 circuit it's got to be good! Then I'll order some boards and give the extras to anyone that wants one.
 
Howdy all. I also have a set of these PCBs coming from JLCPCB, I am using 2 (maybe three) but would be happy to share 2 of them. Probably won't arrive for a couple of weeks - I am never in enough of a hurry to pay for any shipping upgrades...
 
bluedmc777 said:
How much do 5 pcbs usually cost the way you guys are getting them?
Click to expand...
With JLCPCB, five is the minimum quantity for a PCB. If you go with all the default options, and the cheapest shipping, it’s usually like $2 for the PCBs and $5ish for shipping. So under $10.

That $2 for the PCB implies an automatically applied coupon. So if you add another batch of five PCBs, that, and subsequent batches will be… $5 or $7 each (can’t remember exactly).

Of course if you want a four layer board, ENIG finish, castellated holes, big/weird shapes/sizes, etc, the cost can creep up pretty quickly. But for basic two layer boards, it’s really crazy how cheaply you can get a custom PCB made and shipped to your house from the other side of the world.
 
You must log in or register to reply here.
Back
Top