Pinout for kliche footswitch breakout board

[philiptgbell]

I'm putting together the kliche today, and I soldered the footswitch to the little breakout board that comes with it, only to realise that there's no pinout to correspond to the pcb's inputs from the switch.

Does anyone know how to wire the footswitch into the PCB?
Thanks,
Phil

 

[Nostradoomus]

If you have the switch on the right side of the daughterboard they just line up left to right.

 

[philiptgbell]

So it's just straight up S3-S6 left to right onto the footswitch pcb? Dang that's so straightforward, thanks!

 

[Robert]

So it's just straight up S3-S6 left to right onto the footswitch pcb? Dang that's so straightforward, thanks!

Yes, but it looks like your footswitch is on the wrong side.

Post in thread 'Kliche'd'

Nov 2, 2022

Nice! But we need to see a gut shot.

Ok, here they are. Last nights Gold one, and a few months ago I did one in an unpainted box I had. Now I can clearly see the differences and my thought pattern using caps in the signal chain. The unpainted version is undeniably kick ass. The Gold one used Tantalums and 1u Elna's I had left over from a Sansui resto. Unpainted used 1u polyester, electolytic and a 1uf Tant as per official schem on the net. I omitted the battery cause, because. And..... they stack really well. Both of these sound great and very similar parts differences and...

• EZS

• 
• 

 

[philiptgbell]

Yes, but it looks like your footswitch is on the wrong side.

Post in thread 'Kliche'd'

Nov 2, 2022

Nice! But we need to see a gut shot.

Ok, here they are. Last nights Gold one, and a few months ago I did one in an unpainted box I had. Now I can clearly see the differences and my thought pattern using caps in the signal chain. The unpainted version is undeniably kick ass. The Gold one used Tantalums and 1u Elna's I had left over from a Sansui resto. Unpainted used 1u polyester, electolytic and a 1uf Tant as per official schem on the net. I omitted the battery cause, because. And..... they stack really well. Both of these sound great and very similar parts differences and...

• EZS

• 
• 

Ah righto, thanks!