debrad
Active member
A while back I built a PedalPCB Mach1 for a friend of mine and was recently reminded how great the circuit sounds. Knowing that the component count is relatively low, I looked into a couple of vero layouts and noticed that the one found here:
omits the two 22uf capacitors in the power section (C100 and C101).
I think it was @Chuck D. Bones who mentioned these are "power filters" in another Mach1 thread but I thought I would ask for some more details on their function as well as ask for confirmation on whether there are any pros/cons to including or omitting them from the circuit.
As always, your kind and generous contributions to increasing my knowledge on all things pedal (and electronics) related are MUCH appreciated!
omits the two 22uf capacitors in the power section (C100 and C101).
I think it was @Chuck D. Bones who mentioned these are "power filters" in another Mach1 thread but I thought I would ask for some more details on their function as well as ask for confirmation on whether there are any pros/cons to including or omitting them from the circuit.
As always, your kind and generous contributions to increasing my knowledge on all things pedal (and electronics) related are MUCH appreciated!