BadBoomy
New member
Hello everyone. I just finished putting together the Pro-10 (Protein) Dual Overdrive and I'm not getting any signal when the green (right) side is engaged. The blue side works fine, and the signal passes through when both are bypassed. When the green side is engaged, the LED lights up but there is no audio passing through (outside of some of noise when I turn the volume pot). I didn't substitute any components, so I don't think that's the cause. I've checked and double checked the offboard wiring and I'm not seeing any obvious issues there either.
Here's an imgur link to a photo of the circuit board: And a link to a youtube video of what I'm getting:
Hopefully some of you can point me in the right direction of what to try next. I haven't had a problem like this before with previous builds, so I'm a bit stumped. Thank you in advance!
Here's an imgur link to a photo of the circuit board: And a link to a youtube video of what I'm getting: