RG Keen leakage breadboard pic request

[fuzz]

I am a visual learner. I have the schematic, but I am still very very new at deciphering them and how everything flows.

My request: If you have a breadboarded RG Keen style leakage tester that doesn't stray much from the actual schematic itself (I have seen some w/ switches, trimmers etc...) can you post a pic of it?

Thanks!

 

[MobyOctopad]

I tried my hand at RG Keen's method last year when one of the test leads on my DCA broke. Since I suck at de-soldering, I tried it out while I waited for a TC1 to come in. Since I had resistors with 1% tolerance, I ended up using a 2k2 and 270R in series to try to get as close to 2.472k as possible. Not pictured is the battery I was using.

 

[Ginsly]

If you work with stripboard you can put together a teeny tiny board too:

 

[fuzz]

Thanks all, really helpful. @Ginsley, do you happen to know the value of the trimmer in the second pic?

 

[Ginsly]

Thanks all, really helpful. @Ginsley, do you happen to know the value of the trimmer in the second pic?

5K

 

[fuzz]

5K

Thanks, of course now I realize its listed right there...