Hi everyone,
About a month and a half ago, I build a seabed delay kit. Ever since then, it has had this very strange issue: The pedal works completely fine and all features are functional, but if I disengage and reengage the pedal using the footswitch, I only get one repeat, no matter what the feedback knob is set to, until I remove the PT2399 and put it back in.
I have a feeling that its a problem with the PT2399, but I have used four different ones (all from Tayda) and they have the same problem. I have also swapped out the TL072 three times. I have compared my voltages and they seem to be fine, except I'm getting 7.98 for Vcc on the TL072. I have also soldered a bridge between pins 3 & 4 on the PT2399.
About a month and a half ago, I build a seabed delay kit. Ever since then, it has had this very strange issue: The pedal works completely fine and all features are functional, but if I disengage and reengage the pedal using the footswitch, I only get one repeat, no matter what the feedback knob is set to, until I remove the PT2399 and put it back in.
I have a feeling that its a problem with the PT2399, but I have used four different ones (all from Tayda) and they have the same problem. I have also swapped out the TL072 three times. I have compared my voltages and they seem to be fine, except I'm getting 7.98 for Vcc on the TL072. I have also soldered a bridge between pins 3 & 4 on the PT2399.