Some help with Strymon Flint

[Travis]

Hi everyone!

I have a strymon flint and I have a problem with it.

When it is on "mono mode" (internal jumper) it sounds but very very low and dark, in both L and R outputs.
If I turn to "stereo mode" (jumper) left side still very very low and dark.

Anyone can help me? The issue persist even in trails mode and If I turn on the effect and boost the signal it gets louder but still so dark.

 

[Big Monk]

Hi everyone!

I have a strymon flint and I have a problem with it.

When it is on "mono mode" (internal jumper) it sounds but very very low and dark, in both L and R outputs.
If I turn to "stereo mode" (jumper) left side still very very low and dark but right sound perfectly.

Anyone can help me? The issue persist even in trails mode and If I turn on the effect and boost the signal it gets louder but still so dark

There aren’t schematics out there for Strymon’s stuff so I doubt we’ll be able to help you.

Are you using the Color knob?

 

[Travis]

The problem is with the pedal bypass

 

[Big Monk]

The problem is with the pedal bypass

I’d contact Strymon. They do board swaps for a flat rate of $75 plus shipping for their medium sized pedals.

 

[ZETTEMUSIK]

Hi Travis, any light on the problem?. I have bought a pedal for 100 $ (not received yet) that has the same issue. Could it be the configuration of the input?.

 

[ZETTEMUSIK]

Hi, in my case the issue was that the footswitch connectors to the boar were loose. Disassembly of the pedal was a bit of a challenge but worth it.

New item by Elisabet Juan

photos.app.goo.gl