TucsonSean
Active member
This is a mod I made to my General Tso so I could run it at 18V to try and eliminate the issue I was having which I described in my earlier post. I had to roll my own board as PPCB doesn't offer an intelligent or basic relay switcher and charge pump on the same board and I didn't have any spare 3PDT footswitches left.
I changed the J113 to a J112 which has a higher Vgs. Also, change R23 and R25 to 3k from the original 1.5k to ensure I didn't overdrive the LDRs.
The issue I expereiced earlier is now gone and appears to be working as it did before. I'm really liking this pedal and I can understand why so many view this as an always-on pedal.
-Sean
I changed the J113 to a J112 which has a higher Vgs. Also, change R23 and R25 to 3k from the original 1.5k to ensure I didn't overdrive the LDRs.
The issue I expereiced earlier is now gone and appears to be working as it did before. I'm really liking this pedal and I can understand why so many view this as an always-on pedal.
-Sean
