Fuzzonaut
Well-known member
Here's my Bass Dude, sounds glorious.
I wanted the Gain to stay clean for at least 50% and then get into OD territory, so I put a 12AY7 / 6072A into V1 ... and a 7025 WA in V2, both from TAD.
Turned out pretty good, here are some notes on the E string to illustrate.
quick test of the gain range, bass and treble are always on 12 o'clock or 50%. when turning up gain, master gets adjusted (turned down).
0:00 clean
0:07 gain 9pm or 25% (master between 1 and 2 pm)
0:15 gain 12pm or 50% (master 12pm or 50 %)
0:25 gain 3pm or 75 %
0:33 gain 100% (master around 9-10pm)
0:42 clean
I wanted the Gain to stay clean for at least 50% and then get into OD territory, so I put a 12AY7 / 6072A into V1 ... and a 7025 WA in V2, both from TAD.
Turned out pretty good, here are some notes on the E string to illustrate.
quick test of the gain range, bass and treble are always on 12 o'clock or 50%. when turning up gain, master gets adjusted (turned down).
0:00 clean
0:07 gain 9pm or 25% (master between 1 and 2 pm)
0:15 gain 12pm or 50% (master 12pm or 50 %)
0:25 gain 3pm or 75 %
0:33 gain 100% (master around 9-10pm)
0:42 clean
