Hey all - got a question regarding a schematic I found for a tails mode switch for the Dark Rift PT2399 delay. I'm sure I can build it, and I'm sure that I can connect it to the 3PDT no problem, but I'm wondering just where I should be connecting this to the Dark Rift board? Could just be as easy as figuring out which capacitor is the decoupling cap.
also - I'm aware that having a PT2399 chip in tails mode could mean some line noise - that's a risk I am willing to take.
here's the schematic that was originally intended for a stripboard Mad Professor Deep Blue Delay - I've included both the delay layout and the mod switch layout.
also - if anyone does know of an easier way to achieve this, I'm open to suggestions - but I really would like to build this mod on stripboard and add it to a PT2399-based pedal. I'll probably omit the LED and CLR from the jfet board.
thanks!
also - I'm aware that having a PT2399 chip in tails mode could mean some line noise - that's a risk I am willing to take.
here's the schematic that was originally intended for a stripboard Mad Professor Deep Blue Delay - I've included both the delay layout and the mod switch layout.
also - if anyone does know of an easier way to achieve this, I'm open to suggestions - but I really would like to build this mod on stripboard and add it to a PT2399-based pedal. I'll probably omit the LED and CLR from the jfet board.
thanks!