Trademark Fuzz transistor

Billyhank

Active member
I was wondering the specs of the 2SD352 for the Trademark fuzz. I’m having trouble finding that exact transitor and wanted to try to get close.
 
Off memory mine center around 120-160hfe, as high as 300
Low to very little leakage(0-20uA).
A lot of ruskies should work or a good npn 2n130x
 
Would anyone know if AC125 with hfe 120-130 would be a good alternative to the 2sd352 here?

I am also finding it hard to find 2n6428 npn silicon transistors in the EU, so any suggestions for alternatives would be appreciated.
 
AC125 should be fine, check the pin out
BC108B looks like a good swap
Or any npn with a 250-350 hFE is worth a shot.
Thanks for the reply! I found alternatives for the 2n6428 in the 2n5210 with hFE 200-600 and the 2n4401 with hFE 100-300. I'll try both and see.
 
Back
Top