Tweed man (Catalinbread 5F6) no gain [no pain]

[churchmans]

Hello,

Just finished a Tweedman and having some trouble.

toggle switch in "stock bass" mode is very quiet. "lead" mode is barely unity even with gain and vol pots maxed. No signs of gain...
Treble pot is non-functioning too.
pres. trim pot works, all other pots work - except treble.

could these symptoms be connected?

smd SMMBF4393LT1G from mouser with ordinary soldering iron

reflowed solder on treble pot and transistors. - no change
alligator clipped a new pot to the bad ones leads to see if maybe the pot was bad but still no change.

happy to provide voltages or more images if asked.

Anything helps - thanks so much.

build docs here

 

[RobinMallard]

Perhaps some voltage measurements for the transistors would be helpful. I’d also check for continuity between the transistor legs and the parts of the circuit they connect to.

 

[churchmans]

Thank you for the suggestions.

Continuity checks out. at least the smd legs to the through hole open holes is what I did.

q1
B 4.8
E 1.33
C 0.12

q2
B 8.6
E 5.9
C 3.0

q3
B 4.9
E 1.5
C 0.12

q4
B 8.6
E 5.8
C 2.9

q5
B 8.6
E 5.7
C 2.2