the_grumpy_gnome
Active member
They made several tweaks across versions, however the most important to me is the ability to self-oscillate with the extended 'Dwell' control. This change was made going from V2 to V3 in mid-2017.
No, not yet. I have a stack of several pedals that I'm trying to get done. However, when I get to this I'll post.Hey there, any updates on this? I just finished building my Spirit Box, sounds great but modding it so it can oscillate would be great. So have you tried changing the pot or the resistor?
I'll try this with my Pitch Witchstart simple and just jumper R8 and replace the Dwell Pot w a higher value pot like 20k or 25k. its an easy mod and easily reversible if it doesn't work. Dont start with the dwell control dimed!! Work it up slow and see what happens. The Dwell control is really just the feedback control for the PT2399. Go check out the build docs for the Cataclysm, the Sea Horse, The Magnatron, The Chalumeau, and the Pitch Witch for some more ways the PT2399 Chip is hacked to create glorious tone.
Thanks no you are the first one that asked i used white laser decal paper (bought it on Ebay) for the first time and it came out pretty nice.That's a great looking build. Sorry if you've been asked a million times, but how did you get the graphics on your enclosure?
Thanks no you are the first one that asked i used white laser decal paper (bought it on Ebay) for the first time and it came out pretty nice.
Sure, its this one: https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.de/ulk/itm/131908789829Can you share your ebay source? I've been wanting to try this but there's a million different laser decal paper versions.
- “Attack” control adjusts 30ms-150ms of pre-delay - this was not available in V1, it was always set to minimal pre-delay. I can probably figure out how to increase this range in both directions.
I would get a breadboard and try some things out. If I had some time I would give it a go a bandmate has been wanting one for a bit. Just looking at the schematic try some different values at R8.
- Stronger reverb signal with 2x the output