Latest activity

This worked fine for me https://drill.taydakits.com/box-designs/new?public_key=d0RidDhadTVnemZrRVBvaEFMOVA4dz09Cg== It's for an outie...

this has got to be something obviously simple.... Are you 100% confident you are checking your polarity correctly with the multimeter at...

Hi, Thank you for the hints, I just made a Sliver project right now and I though I've do something wrong becouse tone pot seems to to...

Right, apologies for the delay, Christmas and New Year rather got in the way and by the time that was over, I'd forgotten what exactly...

no gut shot? no deets on the mods? ...then it didn't happen :ROFLMAO:

no gut shot? no deets on the mods? ...then it didn't happen :ROFLMAO:

Built an Electrovibe in a cream enclosure. Did a bit of modding to get the speed LED flashing with the LFO and changing colour. Used...

Finally, here's a little light cover I made from a bit of a squirty cream can rolled into shape and soldered together. Idea is to permit...

OK, here's some gut shots.

Right, apologies for the delay, Christmas and New Year rather got in the way and by the time that was over, I'd forgotten what exactly...

Well, anybody have a suggestion on what else I can check for this one? I didnt expect my first one to work without issue but I do hope...

100%. D2 and D3 convert AC signal to DC saw-tooth pulses, actuating Q5 like a toggle switch, which sends the 9VDC power closer to a...

I think you have the wrong understanding about how each capacitor affects the crackle. C13 is 10uf and this will have the biggest impact...

I hear the word hum and start suspecting a bad ground somewhere. Also make sure the jacks are right. I think usually the enclosed jack...

The tone control is post distortion, you have to tap off the input with a buffer of some description in to the 'Dry' input. It's just a...