SOT-23 to SOIC adapters?

MichaelW

Well-known member
I have a project that needed SMD TL074's and I accidentally ordered the SOT-23-14 ones from Mouser.
Didn't notice it until today when I went to solder it.......uhhh.....it's the wrong size.....

I re-ordered the SOIC 14 ones from Mouser but here's my question, wtf am I going to do with a bunch of itty bitty TL074's I have now? Heh...

Does anyone know if they make an adapter board from SOT-23-14 to either SOIC-14 or DIP 14 so I can use these at some point?

TIA!
 
Oh man, I'm getting a crash course in freaking SMD package sizes and my ignorance is glaring.....

Ok, these are the ones I have from Mouser.

Will this adapter work to convert it to DIP14?

I can't seem find the difference between "SSOP" and "SOT-23".
 
I don't think that one will work if I'm looking at the correct footprint in the datasheet.

Can you snap a pic of one of the ICs you have?
 
  • Like
Reactions: fig
Is that a new automotive package? That's an odd package. How is it different than a TSSOP? They both seemingly have 0.5mm pitch.
 
4kxWdRg.jpg
 
That SSOP is 0.65mm pitch, the SOT-23-14 is indeed 0.5mm.... which does bring up a good question.

Who wants to solder that thing? :ROFLMAO:

Really wouldn't be that bad to be honest... You could just flood the pins with solder then wick off the excess.

1662925902308.png
 
Yeah, I honestly don't think it'd be that much worse than 0.635mm pitch. Drag with a chisel, wick excess, verify that there are no bridges (which is made much easier on a breakout board since you can use the DIP pads).
 
  • Like
Reactions: fig
Not a problem. Send em.

I’ll pick up a stencil

It’ll be a piece of cake, with my EZ-Bake.
 
Last edited:
Back
Top