Alan W

1..2..3.. let's go First of all - its big, it's dangerous (almost 300V to power the tube) and rather expensive to build (compared to...

Gotta be honest, I was always just much more of the “start with a low grit of sandpaper and go in one direction, then choose a higher...

If you can put a non-cushioned pad under the paper in your sander, it will sand the high points first, getting you a flatter surface...

I was working on some nice enclosure art for this, but it's been a while since my last pedal and I just wanted to build and play...

Is it needlessly expensive? Absolutely. But rn55s and cmf55s don't make ya muck around with color codes. The value is printed...

The problem with Amazon is that there is no vendor you can really trust, as others above noted, many are way out of spec and also many...

Hello. I’m new to here and to pedal building. I think I’ve hit my millennial dad mid life hobby. I’ve built two different fuzz kits and...

I'll recommend USEFUL, which some find boring, but truly useful is never boring — well, at least utility-builds get ME excited. 😺 EQ...

Welcome to the forum and building in general. It’s not so much whether a particular project is easy/fool proof or not, but more ab...

I’ve been doing this over 12 years, I still get over confident and scree things up.🤣🤣

Weenie. Everyone knows your second pedal should be a ? Flanger from DeadEndFx or a BiPhase clone. 😁😁

The second "op amp" is part of the power supply, not in the audio stream. It's a "voltage doubler"—I think in this case it's used so...

Some of you may recall a few months back I converted my "Goldie" Strat into an H-S-S configuration since the bridge position was already...

It's on the build list! Do you have a turntable under the base? I was going to use one I've had for ages. Put a knob on it so I can...

I need to build Alan W's chassis-holder with RU1's turntable — well, I need to build two, actually. One for my Amp Sifu and another for...