Recent content by HousTom

There’s a heck of a lot of thread here for not one single sound demo. Just sayin’. (sarcastic smiley emoji). Breadboarding it this weekend.

Building my own thing using the C2C HV PS and also the C2C 12AX7 (Left) daughterboard. Problem is the daughterboard has no connection at all to Pin 9 of the tube! Which I'm gonna need in order to run the heaters using 6VDC, right? Obviously I can kludge something but wasn't expecting to have to...

Hi. I’m surprised I don’t see just a generic Butler/Chandler Tube Driver. I mean that’s kinda the OG right? Maybe because they’re available elsewhere. I built one on Vero and they’re pretty rad.

Like this.

Those are the LEDs. Those rings illuminate when the pedal is engaged.

Built the Duo-Vibe this week. Lots of components. No real problems. Fun to build, with the LDRs, etc. Used lighted 3PDTs. Really happy with the "vintage" aesthetic I did together w my wife. I observe that it's pretty finnicky about power supply -- seems to draw quite a bit of current. Also found...

Love the Lightspeed but wish it had better tone control. So I used Oxide PCB to create a Mach-1 (Greer Lightspeed) but with the tone controls of an Oxide (Ibanez MT-10 Mostortion). A "hybrid". Circuits are close enough so I just used the Mach-1's R&C values everywhere except the power supply...

LOL 4 pots. That’s the MDMA (Wampler Euphoria). I was messing with something called the “Warp Control” by Jack Orman / AMZ. http://www.muzique.com/lab/warp.htm Having a test bed like this makes it easy peasy to audition stuff like that. Big 🙏 to BuddytheReow and CDB and all you guys that so...

I recently built myself this little rig that suits my needs perfectly. (Using a MAX1044) I've got +9, -9, +4.5 and GND rails ready and waiting. Then rather than have jacks, pots and switches flying in the air, I used some aluminum angle to which I can mount whatever I need wherever I need it...

Finished this up today and I think it's the first one I've ever posted. Not a challenging build - no surprises or issues. I used clear decal "paper" for the lettering. The "Bass" and "Tone" controls on this box are remarkably versatile and they're interactive with the Gain so it's really...

So rookie me figured "I'm sure ChuckD just meant replace D2 & D3 with jumpers. Four diodes (2 series pairs in back-to-back) equals lots of clipping so TWO diodes (back-to-back) should equal less clipping/more headroom, right?" WRONG. I now understand that a pair of diodes in series has twice...

I fully took this idea and ran. Built myself a really nice little breadboard/proto rig and it is SO USEFUL. In fact I'm so proud of it I'm gonna start a separate thread about breadboard setups and post a photo.

For fun I wired up a switch to compare and confirmed first hand that there's no audible difference between 3mm and 5mm of the same color.

Build doc (rev 3/9/21) says 3mm blue.

Thank you Chuck. Your point is well taken (even though I'm not certain it's one you were trying to make). If a pedal I've just built "doesn't float my boat" then instead of whining about it I should grow a pair, analyze the circuit and mod appropriately. I sometimes forget that entire aspect...