Recent content by KevTom23

  1. K

    Paragon squeal is driving me mad!!

    Hi. Yes and no…. I researched it to death and learned that a lot of clone KoT circuits do it. Some suppliers will even tell you that the squeal is normal when it’s maxed (FuzzDog in the UK, for example). The only thing that worked for me was to either have a buffered pedal in front of the...
  2. K

    Modded Kliche build

    Thank you for the feedback. The copper wire was a welcome relief from faffing about with waterslides and Affinity. The decals are my least favourite part of the process but i got a kick out of doing it this way and I love how it looks. The volume jump when kicking in the LED’s isn’t that huge...
  3. K

    Modded Kliche build

    Mods are basic, but they add a little flexibility. Battery holder cut off. clean knob added Diode selection (ge and 3 x red LED) handled by the left 3PDT footswitch. It also changes the colour of the status led - green for ge, red for led. Decals were formed from bare copper wire, superglued in...
  4. K

    Paragon offboard wiring...

    @PedalPCB - can you shed any light on this?
  5. K

    Paragon offboard wiring...

    Hi all. I have a question that I think I have answered myself, but just need confirmation. I have a Paragon build on the go, but won’t be using 3pdt/true bypass. Instead, I’ll be using DPDT switches and a couple of 3rd party optical bypass daughterboards. Now, the Paragon board and its daughter...
  6. K

    Paragon offboard wiring...

    Hi all. I have a question that I think I have answered myself, but just need confirmation. I have a Paragon build on the go, but won’t be using 3pdt/true bypass. Instead, I’ll be using DPDT switches and a couple of 3rd party optical bypass daughterboards. Now, the Paragon board and its daughter...
  7. K

    Can I cut this off? Kliche board

    Ideal. Thank you 😊
  8. K

    Can I cut this off? Kliche board

    No offence taken 😁. It gave me a much needed giggle
  9. K

    Can I cut this off? Kliche board

    🤣🤣. 🙄🙄
  10. K

    Can I cut this off? Kliche board

    Hi all. I’m building a few Kliche boards and am planning to include a foot-switchable clipping diode option on at least one of them. But I need more space 😏 I’ve checked both sides of the pcb and I can’t see any traces that travel around the battery holder, so I plan to cut this off. Is there...
  11. K

    Alternative bypass methods...

    It pops all by itself unfortunately, so I can’t blame a ything else
  12. K

    Alternative bypass methods...

    Hi all. Do any of you use alternative bypass methods to the ones recommended in build docs? i’ve been strugling with a popping Paragon build for the past couple of weeks. I’ve looked at all the suspects mentioned on this forum, trawled the web and changed the electro input and output caps for...
  13. K

    Paragon Buffer shoe-in

    Thank you. I'll be going for the "always on" option so just needed confirmation that I had the wiring worked out correctly :)
  14. K

    Paragon Buffer shoe-in

    Hi all. In an attempt to rid my paragon build of its higher-gain squeal (both sides on at near full beans), I’m about to build a klon-style buffer circuit on vero board to fit inside the enclosure. There’s no battery, so plenty of room. Would I be right in thinking that the input in the image...
Back
Top