Recent content by y2kornfreak

thank you! two last questions, which ones did you use, the ATTINY13A or kemet EA2 5SMJ? and do you have any wires soldered into power on the relays?

is it ok if i can i see a pic of the wiring? i have 2 intelligent relays too when i meant to get 1 intelligent and 1 basic. i have a rough idea of what to do through other forums, but i want to make sure i get it done right

should i replace the FV-1, 9v and even the L78L33 if the numbers are high? im gonna buy a spare along with klon clone parts just in case

i got a DMM and checked the DC voltage for the L78L33 and the 9v power supply plug. the numbers were 5.7 and 9.5 :( what are my options from here?

also, wouldnt the pedal itself still turn on even if the FV-1 was fried? i imagine i'd just get a crazy noise if it was damaged, but the pedal doesnt light up at all like before

does that mean i have to install a new FV-1? i was afraid of that happening, but even with the lumberg DC, the wires was covered in heat shrink tubing both times. i just forgot to cover the 3rd pole for the innie dc jack... so yeah, still making noob moves on my 5th pedal

yes yes. it still plays when in which i assume is bypass mode.... the LED doesnt light up when it's turned "on"

so i got brand new wires and redid everything. i realized trying a method where i made a little loop around the holes with the wire before soldering made it weak and it broke... so everything was ok and it was playing right and turned on! but now theres a new problem... when i tested it at...

i tried turning up the knobs including the dry and there's no sound

I just built a Haarp pedal. everything lights up, bypass mode has sound running through it but when I turn it on, it goes completely quiet. Saw another post saying it could be the FV-1 chip, so i tried going through each leg with the solder and the problem is still there

Thank you!

quick question on the trim pot: i bought some from stompboxparts.com and theyre 5K 3362P but ive noticed it only has 3 pins instead of the 5 like on the board. will that make a difference and do you know where i can get a 5pin trimpot if it does?

i managed to solve the problem myself. i just built it like normal and used the photos from this post as reference for the relay system https://forum.pedalpcb.com/threads/parentheses-fuzz-with-intelligent-relay-bypass.16594/

hey i just wanted to let you know that i was having trouble looking for info on how to use the intelligent relay system with the parentheses pedal, until i used your photos for reference... the pedal works completely fine for me! i have no issue with the octave knob, and everything works as it's...