Nobelium question

[chongmagic]

I was a moron and put the headers on backwards, I don't think it will make a difference but could someone let me know if it would?



I am working on troubleshooting it right now, third one I have built and this one is not passing signal. Also, the LED on V1 is very dim.

 

[vigilante398]

I was a moron and put the headers on backwards, I don't think it will make a difference but could someone let me know if it would?

View attachment 85894

I am working on troubleshooting it right now, third one I have built and this one is not passing signal. Also, the LED on V1 is very dim.

Putting the headers in backwards will absolutely not work. You'll need to pull those and fix it.

 

[chongmagic]

Putting the headers in backwards will absolutely not work. You'll need to pull those and fix it.

I will see if I can desolder those, I might have to just order some more

 

[chongmagic]

Ok I have flipped the headers and the voltages seem ok, but I am still not passing signal.

 

[vigilante398]

Nothing is jumping out from the picture, definitely look for shorts, look for cold solder joints. It's hard to tell for sure as it could just be lighting, but the solder joint on the yellow input jack wire looks suspect.